| 307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35 | 2013 - 2014 Fusion |
| Diagnosis and Testing | Procedure revision date: 08/21/2012 |
Intermediate Clutch
For intermediate (2,6) clutch operation,
REFER to:
Transmission Description - System Operation and Component Description
(307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation).
or REFER to:
Intermediate Clutch Assembly
(307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation).
Intermediate Clutch
| Condition | Possible Sources | Action |
| Intermediate (2,6) clutch does not apply | Solenoid body filter blocked to Shift Solenoid C (SSC) |
CLEAN or INSTALL a new solenoid body filter screen.
REFER to: Solenoid Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). |
| Shift Solenoid C (SSC) is mechanically stuck OFF |
INSTALL a new solenoid body.
REFER to: Solenoid Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, General Procedures). |
|
| Intermediate (2,6) clutch regulator valve stuck OFF |
DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve. If bore or valve is damaged, INSTALL a new main
control.
REFER to: Main Control Valve Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). |
|
| Shift Solenoid C (SSC) SIG, CB26, CB26FD/CB1234FD hydraulic circuits blocked/leaking |
DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Transmission Description - System Operation and Component Description (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| CB26 supply hydraulic circuit blocked or leaking |
DISASSEMBLE and INSPECT the transmission cover passages for debris/blockage. CLEAN as necessary.
REFER to: Transmission Description - System Operation and Component Description (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Rear planetary sun gear and shell assembly | INSPECT the sun gear and shell for wear and damage. INSTALL new components necessary. | |
| Intermediate (2,6) clutch friction plates |
DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary.
REFER to: Intermediate Clutch Assembly (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Intermediate (2,6) clutch piston seal leakage |
INSTALL a new intermediate (2,6) clutch piston and seals.
REFER to: Intermediate Clutch Assembly (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Intermediate (2,6) clutch always applied | Solenoid body filter seal damaged at Shift Solenoid C (SSC) |
INSTALL a new solenoid body filter screen.
REFER to: Solenoid Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). |
| Shift Solenoid C (SSC) mechanically stuck ON |
INSTALL a new solenoid body.
REFER to: Solenoid Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, General Procedures). |
|
| Intermediate (2,6) clutch regulator valve stuck ON |
DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve and bias spring. If bore or valve is damaged,
INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). |
|
| Shift Solenoid C (SSC) SIG, CB26, CB26FD/CB1234FD hydraulic circuits blocked/leaking |
DISASSEMBLE and INSPECT the main control valve body and separator plate passages for leakage. CLEAN as necessary.
REFER to: Transmission Description - System Operation and Component Description (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Rear planetary sun gear and shell assembly | INSPECT the sun gear and shell for damage that would prevent free rotation. INSTALL new components as necessary. | |
| Intermediate (2,6) clutch friction plates |
DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary.
REFER to: Intermediate Clutch Assembly (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Intermediate (2,6) clutch piston return spring |
INSPECT the return spring for damage. INSTALL new components as necessary.
REFER to: Intermediate Clutch Assembly (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Intermediate (2,6) clutch delayed/soft/slipping apply | Incorrect Transmission Strategy programmed into PCM |
PERFORM the Transmission Strategy Download,
REFER to: Transmission Strategy Download (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, General Procedures). |
| Solenoid body filter seal damaged at Shift Solenoid C (SSC) |
INSTALL a new solenoid body filter screen.
REFER to: Solenoid Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). |
|
| Shift Solenoid C (SSC) mechanically sticking |
INSTALL a new solenoid body.
REFER to: Solenoid Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, General Procedures). |
|
| Intermediate (2,6) clutch regulator valve sticking |
DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve. If bore or valve is damaged, INSTALL a new main
control valve body.
REFER to: Main Control Valve Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). |
|
| Shift Solenoid C (SSC) SIG, CB26, CB26FD/CB1234FD hydraulic circuits blocked/leaking |
DISASSEMBLE and INSPECT the main control and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Transmission Description - System Operation and Component Description (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| CB26 supply hydraulic circuit blocked or leaking |
DISASSEMBLE and INSPECT the transmission cover passages for debris/blockage. CLEAN as necessary.
REFER to: Transmission Description - System Operation and Component Description (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Intermediate (2,6) clutch friction plates |
DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary.
REFER to: Intermediate Clutch Assembly (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Intermediate (2,6) clutch piston seal leakage |
INSTALL a new intermediate (2,6) clutch piston and seals.
REFER to: Intermediate Clutch Assembly (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Intermediate (2,6) clutch harsh apply | Incorrect Transmission Strategy programmed into PCM |
PERFORM the Transmission Strategy Download,
REFER to: Transmission Strategy Download (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, General Procedures). |
| Shift Solenoid C (SSC) mechanically sticking |
INSTALL a new solenoid body.
REFER to: Solenoid Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, General Procedures). |
|
| Intermediate (2,6) clutch regulator valve sticking |
DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve and bias spring. If bore, valve or spring is
damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Removal and Installation). |
|
| Shift Solenoid C (SSC) SIG, CB26, CB26FD/CB1234FD hydraulic circuits blocked/leaking |
DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Transmission Description - System Operation and Component Description (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Intermediate (2,6) clutch friction plates |
DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary.
REFER to: Intermediate Clutch Assembly (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
|
| Intermediate (2,6) clutch piston return spring |
INSPECT the return spring for proper installation and damage. INSTALL new components as necessary.
REFER to: Intermediate Clutch Assembly (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, Description and Operation). |
Copyright © Ford Motor Company