204-00 Suspension System - General Information	2013 - 2014 Fusion
General Procedures	Procedure revision date: 07/19/2012

Front Camber Adjustment - Vehicles Built Up To: 03-June-2013

NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

Using alignment equipment and the manufacturer's instructions, measure the front camber.
General Equipment : Wheel Alignment System

NOTE: Adjustment from maximum inboard to maximum outboard is .5 .
Turn the component Counterclockwise (CCW) through 2 complete turns.
Torque : 235 Nm

Recheck alignment to verify camber change and adjust front toe if necessary.
Refer to: Front Toe Adjustment (204-00 Suspension System - General Information, General Procedures).